Aston Martin diagnostic trouble code
P2762: Torque-converter clutch pressure-control solenoid circuit range or performance fault
Use this reference to understand the recorded condition, confirm the available V8 Vantage or DB9 manual coverage, and follow the documented diagnostic checks before replacing parts.
- Code family
- Powertrain
- Vehicle system
- Transmission
- Manual coverage
- DB9
- Warning-lamp status
- DB9: MIL
What Aston Martin code P2762 means
Torque-converter clutch pressure-control solenoid circuit range or performance fault
DB9 preliminary diagnostic manual · section 2-200
Manufacturer fault-analysis procedure
Test sequence and decision path
1. Connect the WDS and confirm that one of the
above codes is logged.
2. Clear the logged DTCs.
3. Run a short road test and then check the logged
DTCs again.
4. If any of the above DTCs are logged again,
replace the mechatronic unit. and run a brief
road test to ensure that the problem is resolved.
Open the corresponding manual page for wiring diagrams and figures
above codes is logged.
2. Clear the logged DTCs.
3. Run a short road test and then check the logged
DTCs again.
4. If any of the above DTCs are logged again,
replace the mechatronic unit. and run a brief
road test to ensure that the problem is resolved.