Aston Martin diagnostic trouble code
P0716: Turbine/Input Shaft Speed Sensor Circuit Too High/Too Low
Use this reference to understand the recorded condition, confirm the available V8 Vantage or DB9 manual coverage, and follow the documented diagnostic checks before replacing parts.
- Code family
- Powertrain
- Vehicle system
- Transmission
- Manual coverage
- DB9
- Warning-lamp status
- DB9: MIL
What Aston Martin code P0716 means
Turbine/Input Shaft Speed Sensor Circuit Too High/Too Low
DB9 preliminary diagnostic manual · section 2-168
Manufacturer fault-analysis procedure
Test sequence and decision path
1. Connect the WDS and note all logged DTCs.
Confirm that P0715, P0716 or P0717 is logged.
2. Clear the fault code and run a brief road test. If
P0715, P0716 or P0717 is logged again, change
the mechatronic unit.
Run a brief road test to ensure that the problem is
resolved.
Open the corresponding manual page for wiring diagrams and figures
Confirm that P0715, P0716 or P0717 is logged.
2. Clear the fault code and run a brief road test. If
P0715, P0716 or P0717 is logged again, change
the mechatronic unit.
Run a brief road test to ensure that the problem is
resolved.