Aston Martin diagnostic trouble code
P062F: EEPROM emulation lifetime exceeded
Use this reference to understand the recorded condition, confirm the available V8 Vantage or DB9 manual coverage, and follow the documented diagnostic checks before replacing parts.
- Code family
- Powertrain
- Vehicle system
- Other vehicle system
- Manual coverage
- DB9
- Warning-lamp status
- DB9: MIL
What Aston Martin code P062F means
EEPROM emulation lifetime exceeded
DB9 preliminary diagnostic manual · section 2-150
Manufacturer fault-analysis procedure
Manual fault definition
P062F - EEPROM emulation lifetime exceeded
Cautions and notes
CAUTION: This code should be generated only in
the Primary Powertrain Control Module (PCM).
Check that you are working on the correct half of
the engine.
the Primary Powertrain Control Module (PCM).
Check that you are working on the correct half of
the engine.
Test sequence and decision path
1. Connect the WDS and confirm that P062F is
logged.
2. Clear the P062F code. Switch the ignition off and
then on again.
3. If P062F is not logged again, repeat the ignition
off/on test several times to ensure that the problem is resolved.
If P062F is logged again, consult Aston Martin
Technical Support.
Open the corresponding manual page for wiring diagrams and figures
logged.
2. Clear the P062F code. Switch the ignition off and
then on again.
3. If P062F is not logged again, repeat the ignition
off/on test several times to ensure that the problem is resolved.
If P062F is logged again, consult Aston Martin
Technical Support.